Cylindric items of diameters 2 mm to 16 mm, such as single wires, strands, cables, hoses, tubes or round rods, can be labelled with this wrap-around applicator.
Transparent laminate protects data blocks persistently from environmental impacts.
Items are inserted in horizontal orientation and centered by panels. Printing a label and wrapping it around an item takes 1.8 to six seconds, depending on the number of wrap-arounds.
Operation starts as soon as an item has been inserted. It may be triggered also by a foot switch, a data interface or an I/O interface. A label is printed and then picked up by the applicator. The diameter of an item is identified on the wrapper head. The size of a label determines how many times it will be wrapped around the item.
A finger guard covering the feed opening prevents items from being inserted or removed while wrap-arounds are in process. Operations require materials been guided centered on a printer, as well as a slim print roller.
Only wrap-around labels provided by cab guarantee reliable applications. Make sure item surfaces are clean and free of lubricants.
Cab recommends specific materials, in particular small diameters of 2 mm to 3 mm, be tested at the factory.
Pivoting the applicator allows label rolls or ribbons been replaced easily.
A service door enables access to the wrapper head in cases of errors, such as label jams.
Brands: CAB
Cylindric items of diameters 2 mm to 16 mm, such as single wires, strands, cables, hoses, tubes or round rods, can be labelled with this wrap-around applicator.
Transparent laminate protects data blocks persistently from environmental impacts.
Items are inserted in horizontal orientation and centered by panels. Printing a label and wrapping it around an item takes 1.8 to six seconds, depending on the number of wrap-arounds.
Operation starts as soon as an item has been inserted. It may be triggered also by a foot switch, a data interface or an I/O interface. A label is printed and then picked up by the applicator. The diameter of an item is identified on the wrapper head. The size of a label determines how many times it will be wrapped around the item.
A finger guard covering the feed opening prevents items from being inserted or removed while wrap-arounds are in process. Operations require materials been guided centered on a printer, as well as a slim print roller.
Only wrap-around labels provided by cab guarantee reliable applications. Make sure item surfaces are clean and free of lubricants.
Cab recommends specific materials, in particular small diameters of 2 mm to 3 mm, be tested at the factory.
Pivoting the applicator allows label rolls or ribbons been replaced easily.
A service door enables access to the wrapper head in cases of errors, such as label jams.